What equipment to choose for a server room in the house: D-Link, TP-Link Cisco, HP or others?

Question

Computer networks

Question:
What is the best equipment to use (switch or hubs, wifi routers of which manufacturer?), so that it is not expensive, of high quality (for a home network) and with a convenient interface for configuration?
Is there a separate switch (or hub) for each group of outlets, or is it all combined into one network?
I built a house for the customer, 2 floors of 800 m2, made a small server room to which all the wires (UTP 5e) come:
- from Internet sockets (about 10-15 pcs) for wifi routers, printers and,
- Internet for TV (from each TV, UTP 10 points)
- IP surveillance cameras (UTP 6 pcs)
- for smart home and multiroom (10 UTP wires)
The task is to cover the house with a wifi network, so that the Internet comes up to the TV panels, with the ability to install a media server with movies, music, files will be in the server room. View video from cameras on a computer or iPhone.
Thanks in advance if you give me some advice on how best to do it.

Answer 1

price / quality is better than mikrotik not to be found.

Answer 2

Good mesh for home. I see the owner is wealthy, so the budget should be good. I would put:
1. Mikrotik Cloud Router Switch CRS125-24G-1S-RM - the head switch-router, all computers, points and TVs stuck into it. For gigabit, fully managed ports would also turn out.
2. Video surveillance - here you need to look at what and how you plan to use, poe cameras or with separate power supply? A hardware or software video server, hardware ones sometimes have built-in eight ports for cameras - in this case, it is enough for you.
3. Smart home multiroom - iot devices that usually just need access to the network and the Internet, for them, if there are not enough holes in the microtic, you can put a simple 100mb / s switch from any manufacturer, well, or L2 if the client needs security and full control of the network.
4. Wi-fi, as already said, it is best to do it on mikrotik, Ubiquiti, several points with roaming.
5. In the server room we put a 19" locker of units for 10, split all the links into two patch panels into it, and then with patch cords, at any time, to any piece of hardware, wherever your heart desires.

Answer 3

I agree about Mikrotik, but if you need a stupid switch, then the best HP ProCurve. Because you have a lot of sockets, then I would take a switch and a mediocre router from a microt for distributing an Internet, etc. Mikrotik does not seem to have routers for 20+ outlets.
Wi-Fi points I personally worked with points of the same Mikrotik and Ubiquiti - both those and those are ok; can make seamless wifi.
PS
D-link is shit by definition. TP-Link depending on what and why to take ...
CISCO - cool, expensive, hemorrhoids (and in fact you don't need to fuck).

Answer 4

You need to decide on the customer: are you renting a turnkey system - Internet, Seamless WiFi throughout the house, video surveillance with a video recorder and access from the Internet, Media Server, or does the owner deal with all this later?
If the owner will be engaged and then - it is better not to purchase active equipment. They brought the wires to the server room, put a rack or a wall cabinet there, connected it to a patch panel, rang the bell and handed over the work.
If you do it yourself, then again you need to hire a subcontractor who will select the equipment, set up the system and be responsible for your choice of equipment and software, and will bear warranty obligations.
Optimal for the price-quality - Mikrotik. There are routers, access points for wireless WiFi, managed switches with PoE - they allow you to supply power to access points and video cameras via a UTP cable.

Answer 5

Before taking on such tasks, I advise the author to read how hubs and switches differ!