How to set up two vlans with unique dhcp in mikrotik?

Question

DHCP

Hello, there is a network. The Internet is connected via mikrotik, two cables go from it to the switches and further to the computers. It is necessary to organize two subnets on mikrotik through vlan, each with its own dhcp. At the same time that they have access to each other. Tell me how to implement this and how to force computers to connect to the desired vlan.

Answer 1

and how to force computers to connect to the desired vlan.

To do this, you need managed switches. On switches, each port can be assigned a specific VLAN. Connect the PC to a specific port on the switch - the PC gets into the corresponding VLAN. This is the generally accepted way. In another way it is possible if a PC with Linux. As far as I know, Windows does not have full VLAN support out of the box.

Answer 2

Are switches managed or not?

Answer 3

Are the hosts that you want to put in different vlans mixed between switches or not? If not, then the use of vlans is fundamental? Are your switches managed or not? You just wrote the opposite in 2 different comments. Vlan is frame management, i.e. L2.

Answer 4

It's simple, create 2 VLANs, assign them the necessary addresses and then create pools for subnets and DHCP servers associated with specific VLANs
. The DHCP server being created will serve the specified interface.
and connection between subnets drive rules.
.all.

Answer 5

I understand that subnets, VLANs divide the network so that there is no access, if access is needed, one network is needed.