B
B
Bick2012-02-27 19:23:29
Windows
Bick, 2012-02-27 19:23:29

BSOD in SSD on latest SandForce?

I choose between Corsair Force GT 120GB and OCZ Vertex 3 120GB.
There are quite a lot of swear words on the forums on the topic of BSODs of both drives, but the problem is that most of them are dated in the fall of 2011, and the January-February comrades are not taken into account, since they cannot say the firmware version corny.
Given the age of this problem, there are suspicions that it should have been solved by now.
So - tell me please, having experience with any of these two cards, is the problem of freezes and bsods relevant for you?
OCZ seems to be more active in riveting firmware, but there are significantly fewer matyukovs on Force GT than on Vertex.
ZY: The second question is a little more distant. Is it really normal to raise the system, update the SSD's firmware and everything else without having other drives, while the SSDs will be in RAID0?
The maximum that I can do is to insert the SSD one by one into the laptop as a second screw.

Answer the question

In order to leave comments, you need to log in

5 answer(s)
S
Solver, 2012-02-27
@solver

On three computers there are OCZ Agility3 60GB
. All had BSODs, they all recovered the same way - by installing firewood on the controllers.
After installing Intel firewood, I go into the device manager and there are Windows firewood dated 2006 on the controller, I manually prescribe the drivers and everything becomes OK. One laptop on the AMD platform, the same thing, after manually registering the drivers for several months, everything is OK.
It remains a mystery to me why, after installing the Intel firewood, they do not replace the standard Windows ones ...

A
AlexP11223, 2012-02-28
@AlexP11223

Why do you need RAID0?

F
ferasinka, 2012-02-27
@ferasinka

I have been using Vertex 3 120Gb for 6 months. Latest firmware: 2.15, chipset - Z68.
For all the time of using not a single BSOD'a.

L
laQie, 2012-02-28
@laQie

Owner of OCZ Vertex 3 120GB, I have been using it since the beginning of January, during this time I have worked 500+ hours, no problems have been found. Initially, there was firmware 2.15, I did not have to flash it.

F
Frohman, 2012-02-28
@Frohman

Vertex max iops 120gb, fw 2.15. After a month of work, when launching resource-intensive applications (for example, TF2), friezes appeared, up to a complete system freeze for 20-30 seconds. How many times have there been even BSODs with error 0x000000F4.

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question