Where can I find the sled for the Dell PowerEdge T110 II server?

Question

Hard disks

I bought a server, in the case there was a basket for 2.5 disks with 1 installed disk (also 2.5).
SAS disks for Raid have already been purchased and they are 3.5
. The baskets are removed, of course, and there is room for 3.5 disks, only it is non-standard and the distance from the wall to the hard disk is about 5mm on each side, you just can’t fix the 3.5 disks, I tried the adapter didn’t work either .
It is not possible to put on bolts, because it is impossible to crawl with a screwdriver with a screw to fasten the disk.
We need a sled that I could not find in Russia, or their equivalent.
Searching for a day, I found, it seems, they are
"Dell Blue Hard Drive Caddy H7283 U6436 YJ221 RH991"

here is the server itself

, another possible option was found, but I did not find where to buy and whether they fit

help with 3.5 disk installation problem

Answer 1

1. Measure the distance between the hdd and the walls with a caliper and grind it out of plastic (wood) along the profile of the spacer basket, bolt them to the hdd. This is in all seriousness. We're saving. The first disc will take a couple of hours, then faster.
2. All branded sleds are not sold separately, only used ones (eBay, etc.), there is a chance that they will not fit.
3. Maybe someone will read this question and he will have a skid, unnecessary.
Not the worst option, buying a 1U server with a desktop tower CPU cooler is powerful.