Answer the question
In order to leave comments, you need to log in
What is the best way to repair laptop lid hinges?
Please advise how best to repair a laptop.
Answer the question
In order to leave comments, you need to log in
Possible answers:
Make through holes and bolt together
Fill with epoxy Fill with
epoxy. It's been holding up well for a month now.
I repaired the same with nuts with bolts and washers more. The view is spoiled, but it holds more reliably than new ones.
There was a similar problem. I crumbled the plastic base of the hinges. I solved with quick dry superglue and epoxy and also lightened the tightness of the hinges. There are no more problems. Perhaps my experience will help you .
As I understand it, there are two cage nuts that attach the hinge itself to the matrix cover and a third nut for the screw that goes through the bezel and the hinge. According to the mind, a new matrix cover is needed. If collective farming, then degrease the cover, hinge, nuts, screws, bezel. Fill the seat with bauxite and collect this whole sandwich. And look for a new cover.
For my ancient dell 1501 laptop, I bought a cover with a frame (from disassembly) and new hinges on eBay .
I recommend that you go to the service (if parana, take out hard). Easier and faster.
If Kharkiv, then the SC laptopshop does normally for $ and with high quality.
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question