What could be the problem with optibay?

Question

Iron

The problem occurs with the optibeam 22pin sata to 13 pin slimline
No matter what disk I put in there, it sometimes starts throwing file system errors,
wrong index, bad sectors.
There are no errors at all in the native slot.
The data is restored by the checkdisk itself, it does without other tools
. What could be the problem with it
? Tried to protect the disk from static. wrapping it in a package and covering it with electrical tape (including the places of the bolts)
The problem remains
There are those who finished the configuration of the converter? did you draw the diagram?

a photo

What is the contraption number 472 and what function does it perform?
Looked on the net. The owners of the laptop spoke positively about the disk in their pocket
. All the problems (general) that I saw were related to the shutdown problem, switches and MB
interruption .

spoiler

Проблема полностью решена
На разьёме «SATA Slimline Power Connector» (это уменьшенный разьём питания SATA специально для ноутбучных DVD-ромов) перекусил первую и четвёртую ногу, соответственно сигналы «Device presence» и «Manufacturing diagnostic». Ушлые китайцы просто замкнули эти сигналы на 5вольт. Отсюда это перманентное прерывание ACPI. Сами подумайте, нафига в разъеме питания сигнальные провода, ведь в стационарных машинах все приводы спокойно питаются от молекса.
Надеюсь, мой опыт пригодится другим бедалагам

This is what it turns out you need to "have a bite to eat?"
Outwardly, if you look: it hangs stupidly. I would say it's a disc. I even tested the ssd on it. Hang did not hang. But the speed decently fell periodically (in the main slot it plows as it should)

Answer 1

What is the contraption number 472 and what function does it serve?

This is not a number, but a value, which can be guessed from the same marking on the thing itself;).
Gizmo - resistor (separating), 472 - accepted marking 47 - value, 2 - number of zeros, total - 4700 Ohm = 4.7 kOhm
Power supply on the left - wide connector.
In general, such an "adapter" is a terrible junk, no capacitors, one and a half resistors ... and signal matching? I would give it back.