verify_fix doesn't run, what's wrong?

Question

RAID

Raid array:

Logical device number 3
   Logical device name                      : data
   RAID level                               : 1
   Status of logical device                 : Degraded
   Size                                     : 114290 MB
   Read-cache setting                       : Enabled
   Read-cache status                        : On
   Write-cache setting                      : On when protected by battery/ZMM
   Write-cache status                       : On
   Partitioned                              : Yes
   Protected by Hot-Spare                   : No
   Bootable                                 : No
   Failed stripes                           : No
   Power settings                           : Disabled
   --------------------------------------------------------
   Logical device segment information
   --------------------------------------------------------
   Segment 0                                : Inconsistent (Controller:1,Connector:1,Device:0) OCZ-8ZD4228013QK08QS
   Segment 1                                : Present (Controller:1,Connector:1,Device:1) OCZ-P4DF9R2IX68CU47D

Most likely the difference is in the checksums.
I run the rebuild command:

arcconf setvmcredential 192.168.1.25 5989 root *****
arcconf task start 1 device 0 4 verify_fix

After that, a window pops up with the fact that the controller is busy with something important.

Most likely you will have to go into the raid controller utility and already there to conjure with the raid array.