Answer the question
In order to leave comments, you need to log in
Setting up an FPVC regulator with SBEC 5.5V/6A?
Good afternoon!
I need to configure the FPVC speed controller on the basis of msp430 and HMO1003A-60 PBFHMO1003A-60 PBF (microphone). (As far as I understood from the sound signals in the regulator menu)
Please tell me how to connect the speed regulator to msp and what kind of signal will come from the regulator?
Answer the question
In order to leave comments, you need to log in
From what I know and what I managed to google - the regulator will "squeak" with the windings of the motor to which it is connected. In this case, the settings are controlled by the remote control stick associated with this controller.
Thus, you need to emulate the protocol by which the remote control receiver communicates with the controller. That is, the microphone recognized the number of "beeps" from the regulator and, in response, "moved" the stick. Somehow, perhaps.
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question