Mikrotik tunnel monitoring

Question

Mikrotik

Good afternoon, there is a working l2pt / ipsec tunnel, there is a great desire to monitor it with zabbix, but everything would be fine if oid did not change when it was broken-reconnected:
12 DR name=.1.3.6.1.2.1.2.2.1.2. 8388643 mtu=.1.3.6.1.2.1.2.2.1.4. 8388643 mac-address=.1.3.6.1.2.1.2.2.1.6. 8388643
admin-status=.1.3.6.1.2.1.2.2.1.7. 8388643 oper-status=.1.3.6.1.2.1.2.2.1.8. 8388643
bytes-in=.1.3.6.1.2.1.31.1.1.1.6. 8388643 packets-in=.1.3.6.1.2.1.31.1.1.1.7. 8388643
discards-in=.1.3.6.1.2.1.2.2.1.13. 8388643 errors-in=.1.3.6.1.2.1.2.2.1.14. 8388643
bytes-out=.1.3.6.1.2.1.31.1.1.1.10.8388643 packets-out=.1.3.6.1.2.1.31.1.1.1.11. 8388643
discards-out=.1.3.6.1.2.1.2.2.1.19. 8388643 errors-out=.1.3.6.1.2.1.2.2.1.20. 8388643
i.e. these data 8388643 change every time, does anyone have an idea how to implement this scheme?

Answer 1

The documentation says about dynamic interface identifiers: https://www.zabbix.com/documentation/ru/1.8/manual...
PS
Dynamic indexes are supported in Zabbix starting from version 1.5.

Answer 2

@karabanov
This is what the channel looks like when idle... =)