Answer the question
In order to leave comments, you need to log in
Is this number of networks normal in OSPF?
Hi all.
I work with dynamic routing insofar as the architectural question naturally arose: are the networks chosen too flat and scattered and will the further growth of the routing table (and it will certainly be) create problems in the future? Perhaps some optimizations need to be done before it's too late.
An example of a config of one of the branches, OSPF protocol.
# DST-ADDRESS STATE COST GATEWAY INTERFACE
0 10.0.0.0/30 intra-area 20 10.0.0.13 to101v01
1 10.0.0.4/30 intra-area 20 10.0.0.13 to101v01
2 10.0.0.8/30 intra-area 20 10.0.0.13 to101v01
3 10.0.0.12/30 intra-area 10 0.0.0.0 to101v01
4 10.0.0.16/30 intra-area 20 10.0.0.13 to101v01
5 10.0.0.20/30 intra-area 20 10.0.0.13 to101v01
6 10.10.1.0/30 intra-area 20 10.0.0.13 to101v01
7 10.10.2.0/24 intra-area 21 10.0.0.13 to101v01
8 10.10.6.0/27 intra-area 21 10.0.0.13 to101v01
9 10.10.8.0/24 intra-area 20 10.0.0.13 to101v01
10 10.10.10.0/24 intra-area 21 10.0.0.13 to101v01
11 10.10.100.0/24 intra-area 21 10.0.0.13 to101v01
12 10.10.200.0/24 intra-area 21 10.0.0.13 to101v01
13 10.10.201.0/28 intra-area 21 10.0.0.13 to101v01
14 192.168.1.0/24 intra-area 10 0.0.0.0 bridge
15 192.168.2.0/24 intra-area 21 10.0.0.13 to101v01
16 192.168.3.0/24 intra-area 1020 10.0.0.13 to101v01
17 192.168.7.0/24 intra-area 30 10.0.0.13 to101v01
18 192.168.29.0/29 intra-area 120 10.0.0.13 to101v01
19 192.168.29.8/29 intra-area 120 10.0.0.13 to101v01
Answer the question
In order to leave comments, you need to log in
In principle, there will be no problems as long as the tablet is placed in the RAM.
well, OSPF doesn't really give you options :)
PS It's not much, when you get to three zeros, then you can already talk about something, but I'm afraid then you will be more worried about bandwidth;)
It depends on the performance of the equipment, I had a network with 2k+ OSPF prefixes, although they were divided into many areas.
/me looked at the network, where there are about 50k routes in ospf.... so what?
There is nothing to worry about in your case....
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question