How to upgrade the UPS board to disable Green Mode?

C

Camaro672015-07-04 10:34:38

Electronics

Camaro67, 2015-07-04 10:34:38

Hello dear experts.
In general, there is an FSP Viva 800 UPS, but it has one big minus - you cannot disable Green Mode in it. Those. it turns out at low load (for example, if one router is connected), it is cut down after 5 minutes. Tried to contact those. FSP support, but did not receive a response.
Searched for information on the internet. I came across several articles that show how to disable this mode on some models, for example, by unsoldering one resistor. Is it possible to do something similar with this model? Below is a photo of the board. I understand that you can't tell much from the photo, but maybe someone has already encountered such a problem.
Thank you in advance.
PS I know how to use a soldering iron :)

Reply

Answer the question

In order to leave comments, you need to log in

3 answer(s)

M

MgmZog, 2015-07-04
@MgmZog

It is better to power the router from the RIP, which outputs 12V directly without converting to 220V.
For example bolid.ru/production/reserve/rip/rip-rs485/rip-12v-...

R

Rsa97, 2015-07-04
@Rsa97

And through the native software does not turn off? The manual seems to show the setting "Green power function"

M

Michael, 2017-03-12
@Madfisht3

Green mode can be disabled directly on the PWM controller.