How to replace original HDD in HP DL360e Gen8?

Question

Iron

The essence of the problem:
Server HP DL360e Gen8
HP Dynamic Smart Array B120i Controller
Raid 1 + 0 4 HDD 2 Tb
each 3rd HDD crashed
Indication: Orange (constantly lit) - failed disk, replacement is required
ILO status:
Physical Drive in Port 1I Box 1 Bay 3
Status Failed
Serial Number
Model MB2000GCWDA
Capacity 1863 GB
Location Port 1I Box 1 Bay 3
Firmware Version HPGD In the
logs: Internal Storage Enclosure Device Failure (Bay 3,Box 1,Port 1I Slot 0)
HDD for non-original
(Seagate. WD, Hitachi) with the same characteristics?
Looking at the specificationwww8.hp.com/h20195/v2/GetPDF.aspx/c04128167.pdf
only supports Hot Plug.

Answer 1

There is an HP DL360p Gen 8, we successfully feed it non-branded drives. Their controller, of course, swears at this and says that the disk is not native, I will not control the indication, but otherwise it works quite normally with them, disks are added to raids with branded disks.