Answer the question
In order to leave comments, you need to log in
How to install dos and win 98 on hard drive?
In general, there is a stump 3 with 126 MB of RAM. floppy 3.5 and a bunch of used floppy disks.
I want to make it so that DOS is loaded when the PC is turned on.
And if necessary, the win command turned on windows.
I thought I should create the installation disks first... and got stuck.
From one site I downloaded the images and unpacked them onto floppy disks.
I'm loading "disk i / o error replace the disk and press any key"
Then, through windows xp, I formatted and ticked "create an MS-DOS boot disk".
I'm loading and he again "disk i / o error replace the disk and press any key".
In general, what to do?
Answer the question
In order to leave comments, you need to log in
Win98 contains MSDOS7.0, from the graphics it was possible to boot into MS-DOS mode, but I don’t remember how to do it at boot, but somehow it was possible.
Throw out the floppy disks, if they have survived to this day, then they fall off to their heart's content right into the flop drive. According to the subject, form the first section of the screw into fat, put distr 98 in it, the image of the recovery floppy disk and grab4dos. Grab map --mem
myfloppy.img (fd0)
chainloader (fd0)+1
in dos run C:\win98\setupcor.exe and lean back in your chair
after installation just add bat command com to autoexecute
Win98 won't start from DOS. It has its own "kernel" - MSDOS 7.0, which has been slightly expanded compared to DOS 6.22 - the last "hungry" version. Pure DOS in parallel with win98 is possible only with a dual block. To do this, you can use a boot disk - it seems that by that time booting from a CD was already supported. Although of course it will be a lot of sekasu. Well, floppy disks apparently you have died. Or the flop. Or both :)
Win98 can't be run from DOS. The win command was relevant in windows 3x.
If you need dos, then download the boot disk of some freedos or msdos 6.22. Google - this goodness is still enough in the internet.
But first you need to check the disks and the drive. Maybe stupid iron is not working properly.
If you have a modern USB drive in WinXP, for example, then it may well corrupt floppy disks or format them in such a way that other drives cannot read them. The quality of current Chinese USB drives is disgusting.
to begin with, ask yourself why do you need it
and do you need the time that you lose on these troubles
, if you have it in abundance, just think about the fact that a meteorite can hit our mortal earth flying at the speed of trillions of light and sound years at any second, you won’t even feel it,
but you’ll think about it later, when you install this 98th wins on your processor,
if you live in sao, moscow, I can give you an ide dvd-rom, boot from a blank and install it, even memory, maybe, and hard ladies on 20GB, it's a pity to throw it away, I think the pci vidyashka was still lying around, well, I'll see))
and I'm sorry if I offended, purely my personal opinion,
if you're not too lazy, then join the VK group, https://vk.com/binexe_ru, constantly the best news from the world of computers, you understand))
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question