How to get from the local network to the UBNT device with a bridge connected to the wan port of mikrotik?

Question

Mikrotik

The Internet is connected to mikrotik through a bridge consisting of a base station and a client point configured in bridge mode. Station ip 192.168.1.20 client ip 192.168.1.21 the bridge is transparent, through it mikrotik receives IP from the provider.
It is required to get to the web interface 192.168.1.20 and 192.168.1.21 from the mikrotik local network. What rules need to be created for this to work?
Is it possible to create a rule that will allow access to the web interface 192.168.1.20 and 192.168.1.21 from the world?

Answer 1

A normally configured bridge just does not look towards the subscriber, because there is nothing for the subscriber to do in the manager.
In some stubborn cases, it will be enough to add an ip from the 192.168.1.0/x range to the external interface of your Mikrotik.
If in this way the muzzles open, then you can use a random port from your external ip, the action is similar to the usual port forwarding.

Answer 2

"A normally configured bridge just doesn't look in the direction of the subscriber, because the subscriber has nothing to do in the control room."
This is my bridge(s). And I need him to look in my direction. Otherwise, if you need to correct or reconfigure something, or go to the AP, you have to physically insert the bridge into the computer's network card. It is not comfortable.
Is there any other solution?