How to correctly make a route to a remote network via VPN?

Question

Mikrotik

Good afternoon. I'm trying to make a route to the office network via VPN from the home network router.
We have:

• Mikrotik home router, subnet 192.168.0.1/24
  
• Mikrotik office router configured correctly, office subnet 10.22.3.0/24
  
• An l2tp server with a pool of addresses 272.111.111.0/24 was raised on the office router
  
• I can connect from a working machine by setting the subnet as the main route and accessing the addresses 10.22.3.0/24
  

There is no way from the home router, namely:
I raised the l2tp connection and it works. Registered a route to the addresses 10.22.3.0/24 and that it is necessary to break on the l2tp interface. (gateway 172.111.111.1)
Packets leave, but nothing comes from there. Am I missing something in the firewall?
However, I do not want this route to be the main one. Only for office subnets
Or do you still need to use masquerade?

Answer 1

I think I figured out what's wrong.
the office router knows nothing about the 192.168.0.0/24 subnet. And there are no routes. That's why he doesn't answer me.
Through masquerade everything works fine. but this is a crutch .... I do not like to masquerade traffic between subnets

Answer 2

In both ticaks, set the full permission for traffic to pass through firewalls between home/work subnets. Also on both register routes to subnets and where to look for them.