How to change Ip to external in CS server?

Question

network hardware

Available:

• Router SNR-CPE-W4g (Wive-RTNL)
  
• Computer connected to the router via wires
  
• Ready server CS 1.6 (in the sense of the program)
  
• Wire to the Internet. IP-shnik is white, as the provider assures
  

When you run hlds_console or hlds, only the local IP address is written everywhere. As I understand it, the router interferes. So how should it be configured? Mb easier to connect directly?
Z.Y. With ports, there is an effort: everything seems to be open, the firewall, in the settings of the router, but still 2ipru shows that 27015 is closed.

Answer 1

To configure port forwarding - on WIVE-NG-RTNL you need to go to the "Firewall" > "Firewall" section.
Fill in the fields as follows:
"Interface" - WAN, "Protocol" - TCP & UDP, "SRC Ports" - 27015, " Dst IP" - the IP address of the computer on which cs is installed, "Dst Ports" - the same value as in Src Ports - 27015, "Comments" - cs. Click the "Add" button and then "Apply".
Also on the computer, if the firewall is enabled, you need to allow incoming connections on port 27015

Answer 2

you need to forward ports on your router to your local machine from the outside, after which you can connect to your server by accessing your white IP.