Who faced refilling cartridges of such monsters: xerox phaser 7100 and conica minolta bizhub 164?

Question

MFP

Hello, today a terrible message appeared on the display of the xerox phaser 7100: "y color resource is running out". Thank God there is a toner. But what about the chips, is it possible to pull out the cartridge to refuel and plug it back in?

Answer 1

If you want to save money - use compatible cartridges. And even such "savings" will be better than what you want to do. Of course, there is always your option - you can ruin the device for 60 kilo rubles because of the savings of 2000 rubles.

Answer 2

Whenever refueling or restoration is required, I always turn to the guys at www.admis.ru/catalog/zapravka , because if you don’t know all the nuances of working with the printer, it’s better not to get involved. This is the only thing I can recommend!

Answer 3

konica minolta bizhub 164 in the same place the toner tube is inserted, not the cartridge

Answer 4

Unfortunately, in this device, Xerox has applied energy-saving technologies - the temperature of the oven and toner baking is lowered. To realize this, a polyester chemical toner with a lower bake temperature is used. At the moment, there are no analogues to this toner. All attempts to fill these tubes will result in poor image baking.
So far, only the original.
All one to one! A mailing has arrived: toner for these devices and analogues (Xerox 6500/7500/7800..., DeLL5130) has entered production. Namely "chemical" and "polyester". I think they will bring us to Russia by the summer.