What will provide the best signal quality for a copper socket or rj-45 connector?

Question

Computer networks

What will provide the best signal quality for a copper socket or rj-45 connector?
Total cable length <= 40 meters. It needs to be extended another 5 meters. Octopus. Now included in a 100 megabit port, in the future it will be gigabit.

Answer 1

Fuck, that's completely and absolutely, at 40 meters and gigabit, even twisting with dirty hands, make it work fine, there's no difference at all, as long as your network pulls gigabit. Copper and categories above 5 are needed for short patch cords of 10G or more, for borderline operating distances (above 120 meters without signal amplification), or for self-hypnosis.

Answer 2

There will be no difference for you, at such a distance the loss of quality will not be significant in any case.

Answer 3

Wu!!! Only Denon AK-DL1 for $500 is suitable for this, otherwise bits will run in the opposite direction, MP3 will be played with clicks.
PS. It's really easy to buy a normal category 5e/6e neomax cable, normal connectors (category 5/6e) and the correct crimp. All together with a bay of 355 meters will cost 6000-7000 rubles at the current exchange rate. The correct crimping pliers are those that press on the connector not sideways, but from above !!!
Yes, according to the standard, the cable cannot be more than 120 meters!
Well, or just buy a patch cord of the required length www.ulmart.ru/catalog/93198?sort=5&viewType=1&rec=true
And the signal quality mainly depends not on the cable or connectors (they are certified for almost everyone!), but on the quality of the crimp (see correct pliers)!

Answer 4

Well, you need sockets and connectors. Connect with scotchlok, or at worst twist it normally (coil to coil so that there is no bounce)