Z
Z
Zheka2015-02-26 09:58:54
laptops
Zheka, 2015-02-26 09:58:54

What is better: a 32 GB emmc card soldered to the motherboard, or a 5400 rpm hard drive on a laptop?

What is better: a 32 GB emmc card soldered to the motherboard, or a 5400 rpm hard drive on a laptop? and there is also a new acer laptop with a 32 GB emms memory card, so there is usb 3 if you connect an external disk via usb ssd and put an operating system on it, do you think it will work faster?

Answer the question

In order to leave comments, you need to log in

2 answer(s)
S
Sergey, 2015-02-26
@bk0011m

USB3 - information transfer rate up to 5 Gb / s at the peak.
eMMC - read speed at 250 MB / s, and write speed - at 125 MB / s
IMHO - USB is at least 2-3 times faster. But this is a specification. You will only know the actual speed by checking.
Put - try.
Again, it all depends on the discs. SSD - have about the same speed as eMMC. so there may be no growth.

V
Vyacheslav Barsukov, 2015-02-26
@slavabars

Regular hdd is always slower than flash memory.
Between USB and a soldering iron, I would choose a soldering iron.

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question