What can go wrong?

W

WilDaimon2017-11-30 19:07:07

RAID

WilDaimon, 2017-11-30 19:07:07

What can go wrong?

Good day to all. The situation is the following. There is a server running win server 2003, SE7505VB2 board, intel 82801db ultra ata storage controller 24cb disk controller, SiI 3112 SATA RAID controller. Phoenix BIOS. When turned on, it emits a short "peak", then a pause, then 3 short "peaks". After a day of work, it starts to "beep" every 2 seconds. 4 disks are plugged into the controller, respectively 2 mirrors. The disks are in the basket, all the lights are green. There are 4 orange LEDs on the RAID controller board labeled A,B,C,D. C and D are on. At the same time, everything seems to be working, all disks are detected, all 4 disks are visible in the RAID BIOS. What could be the problem?

Reply

Answer the question

In order to leave comments, you need to log in

2 answer(s)

D

Diman89, 2017-12-01
@Diman89

Read the manual for the controller and the description of the indicators on it. Maybe the disks have bad SMART

W

WilDaimon, 2017-12-01
@WilDaimon

I don't have a manual and couldn't find it online. Will Check Disk be able to show the problem?