M
M
Maxim Minets2016-04-13 19:09:05
WiFi
Maxim Minets, 2016-04-13 19:09:05

Very slow WiFi on RB951Ui-2HnD What should I do?

Good day. There is a problem. The office has 2 RB951Ui-2HnD, a 100 Mbit channel is supplied. Through ether ports, traffic runs perfectly - 90 Mbps. But on WiFi the speed is a maximum of 15Mbps. The most mysterious - on both ... I don’t know how they worked before me - only recently here. Both have been completely cut and reconfigured. No improvements. I decided that perhaps the air was bad, I tested it at home. In the same way - 96, and on WiFi 15. I've been twisting for more than one day ... Tell me, can anyone come across a similar one. This is my first time. Most alarming is that both RBs are buggy at once ((((

Answer the question

In order to leave comments, you need to log in

3 answer(s)
A
Alexander Romanov, 2016-04-16
@moneron89

Install wireless protocol 802.11 and take that horsepower away. Set 18-20 dBm. And even easier - set the regulatory domain and antenna gain to 2 dBi. Do not forget that in addition to the congestion of the air, there is also interference from your own router.

I
Ivan Moiseev, 2016-04-13
@mo1seev

What is the channel width?

D
Dmitry, 2016-04-13
@BuHToPe3

At one time, I also had sex with Wi-Fi on my microtic for a very long time (the same only gigabit)
As I didn’t set up more than 25, I didn’t squeeze ...
Just recently I updated the firmware and set it up like this, as a result, 80 megabits spits.
Nstreme - disable everything
Tx Power - Default

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question