Unicast stream from port to Mikrotik port?

Question

Mikrotik

New RB3011, startup configuration removed.
I did not prescribe any rules in the Firewall as unnecessary.
It is necessary to receive a Unicast stream from an encoder that streams over IP and then transfer it to a consumer that sits on a neighboring port of the same microtic.
Assigned ports:
Ether2 - 10.10.0.1/24 - a user is connected to it, user IP 10.10.0.2 GATE 10.10.0.1
Ether4 - 172.0.0.1/24 - an encoder is connected to it, encoder parameters: IP 172.0.0.2, GATE 172.0.0.1
In the encoder settings, I specified to stream with a unicast to the address 10.10.0.2.
As a result, Torch on Ether4 shows that the stream comes to this port and the correct IP 10.10.0.2 is specified in the destination field, but it does not go further for a reason that is completely incomprehensible to me.
Tell me where to dig and is it possible in principle to forward a unicast stream between tick ports?
Update: made the Ether2 port master for the Ether4 port, as a result, a stream appeared on the Ether2 interface from 172.0.0.2 to 10.10.0.2, but the user still cannot open the stream in vlc at udp://10.10.0.2:3566

Answer 1

Everything turned out to be easier than you could imagine. It turned out that it was enough to simply transfer the stream from UDP to RTP - and everything immediately became OK. Apparently Mikrotik is not friendly with this particular encoder over UDP

Answer 2

Well, having become a master, you actually combined the ports into a bridge ... and they began to exchange traffic.
What you want is done by routing on Mikrotik. IP> routes. There must be registered paths for subnets back and forth. Devices must understand on which port \ ip they are looking for a different subnet.
You are actually trying to send traffic from the user's ip to the encoder's subnet, and they have different subnets and different gateways. And they do not understand where and how they need to "go"
In general, as far as I know, the correct option is the location of Unicast in the same network as the client.