Sound through speakers and headphones, Windows 10 x64, how to implement?

Question

Audio

Good day! I stuck a 10 in order to evaluate. I like everything, but here's the problem: the system itself found the driver for the sound, and when the headphones are connected, the sound only plays in the speaker until I switch the default playback device in the sound settings. At 8.1 it was like this: if you plugged in the headphones, then you play them, pulled them out - the sound goes to the speakers. And then there are the uncomfortable movements.
I tried to find the Reraltek manager to disable auto-detection of connectors on the front panel, tk. I hook headphones to it, but I didn’t find something for 10 under VIA VT1708S. At the office I downloaded the site for 8.1 x64, with the hope that it will work. As a result, nothing was properly installed, the VIA HD Audio Check icon appeared in the control panel, something is not right, especially since it does not start at all.
Please help.

Answer 1

Solved a problem.
1. In the device manager, I cut out the driver that was installed, blocked the installation of firewood through the update center.
2. Rebooted.
3. Voila!
PS Windows itself, like a hike, caught the right driver, and before that I put all the firewood through DriverPack, apparently old ones. Yes, and the device name changed after that to "Device with Realtek HD Audio support".

Answer 2

Install a normal driver for your sound card under Windows 10.

Answer 3

look for other drivers

Answer 4

I got it in a way;
1) go to the device manager
2) select the audio card and click configure
3) click disable the driver, turn it on after 10-20 seconds

Answer 5

I know the problem has already been fixed. But I will advise another way, maybe it will come in handy for someone)))
In general, open the device manager, enter the devmgmt.msc command. Click on the tab associated with the sound RMB, look for properties and see what is written in the column with the device status. If everything works fine, then use the initial instructions in this article , which talks about the correct drivers after reinstallation. Download and install them.
But if something is wrong, the problem may also be in the driver.
Also try administration. We go into the control panel, and we find the item "services", after - Windows Audio. Make sure that the "launch type" is "automatic", and not something else.
That's all))) I wish you good luck!

Answer 6

The easiest way to solve this problem, you don't need to delete anything, just go to the device manager, through the command: devmgmt.msc, then click on "Sound, game and video devices" there should be "VIA HD something like that", right-click click on "Properties", then "Driver" and roll back. Everything, the problem is solved, all Pts. easily :)

Answer 7

I have the same bug. I can't solve the problem in ANY WAY...
Immediately after installing Windows, she found the driver herself. And when you connect headphones to the front panel, "Headphones" appears in "Playback Devices". BUT then the system does not see the sound distribution on 5.1 (I have a 5.1 system connected).
When I put the driver, the distribution is visible to the system. But the system does not respond to headphones.

Answer 8

1. Removed Realtek High Definition Audio from Device Manager.
2. Rebooted, Windows itself found the appropriate drivers.
3. Downloaded the old version 64bit_Vista_Win7_Win8_R270 - www.overclockers.ru/softnews/47805/Drajver_Realtek...
4. Installed them without rebooting, checked and everything worked.

Answer 9

did everything possible but could not fix the problem (specifically, what did you remove among the drivers?