Should I change my hard drive to a different ESXI adaptec manufacturer?

I

Ivan2015-10-16 12:30:54

VMware

Ivan, 2015-10-16 12:30:54

In the morning the host with ESXI hung up. The storage was not displayed, I had to restart it. As a result, the disk flew off.

Controller information
----------------------------------------------------------------------
   Controller Status                        : Optimal
   Channel description                      : SAS/SATA
   Controller Model                         : Adaptec 6805
   Controller Serial Number                 : 2B0511E455D
   Physical Slot                            : 2
   Temperature                              : 65 C/ 149 F (Normal)
   Installed memory                         : 512 MB
   Copyback                                 : Disabled
   Background consistency check             : Disabled
   Automatic Failover                       : Enabled
   Global task priority                     : High
   Performance Mode                         : Default/Dynamic
   Stayawake period                         : Disabled
   Spinup limit internal drives             : 0
   Spinup limit external drives             : 0
   Defunct disk drive count                 : 0
   Logical devices/Failed/Degraded          : 3/0/1
   NCQ status                               : Enabled
   Statistics data collection mode          : Enabled
   --------------------------------------------------------
   Controller Version Information
   --------------------------------------------------------
   BIOS                                     : 5.2-0 (18668)
   Firmware                                 : 5.2-0 (18668)
   Driver                                   : 1.1-7 (29100)
   Boot Flash                               : 5.2-0 (18668)
   --------------------------------------------------------
   Controller ZMM Information
   --------------------------------------------------------
   Status                                   : ZMM Optimal

Logical device number 2
   Logical device name                      : 4
   RAID level                               : 1
   Status of logical device                 : Degraded
   Size                                     : 114290 MB
   Read-cache mode                          : Enabled
   Write-cache mode                         : Enabled (write-back)
   Write-cache setting                      : Enabled (write-back) when protected by battery/ZMM
   Partitioned                              : Yes
   Protected by Hot-Spare                   : No
   Bootable                                 : No
   Failed stripes                           : No
   Power settings                           : Disabled
   --------------------------------------------------------
   Logical device segment information
   --------------------------------------------------------
   Segment 0                                : Missing
   Segment 1                                : Present (Controller:1,Connector:1,Device:1) OCZ-O56E0936HA2646Z3

OCZ-vertex3 has been out of production for a long time.

Device #2
         Device is a Hard drive
         State                              : Online
         Supported                          : Yes
         Transfer Speed                     : SATA 6.0 Gb/s
         Reported Channel,Device(T:L)       : 0,5(5:0)
         Reported Location                  : Connector 1, Device 1
         Vendor                             : 
         Model                              : OCZ-VERTEX3
         Firmware                           : 2.11
         Serial number                      : OCZ-O56E0936HA2646Z3
         Size                               : 114473 MB
         Write Cache                        : Enabled (write-back)
         FRU                                : None
         S.M.A.R.T.                         : No
         S.M.A.R.T. warnings                : 0
         Power State                        : Full rpm
         Supported Power States             : Full rpm,Powered off,Reduced rpm
         NCQ status                         : Enabled

Should I replace it with another model?

Reply

Answer the question

In order to leave comments, you need to log in

1 answer(s)

A

Alexander Chernykh, 2015-10-16
@sashkets

I have a 3ware controller on which the storage of virtual machines (esxi starts from a flash drive). changed Seagates to WD. all right.
each controller has a list of compatible drives. here it is possible that such disks are no longer on sale and to work with new disks, you need to update the controller firmware.