Answer the question
In order to leave comments, you need to log in
NAT in Ciasco ASA. How to set up port forwarding?
Greetings and asking for help. There was a need to borrow / forward? port. The topology is something like this:
Lan is nested on it. In the subnet 192.168.2.0, a critical service is running on the video conference server + ball. It must be accessed from the second subnet. The piece of iron is combat, a lot of things are wound up on it, so I can’t experiment. Probably, I will try in packettracer.
My skills, unfortunately, are not enough yet. AS-I generally hold in my hands for the first time .
P.s. Good howtos will do)
Answer the question
In order to leave comments, you need to log in
A good howto , SNAT has been working since firmware version 8.3 of EMNIP.
Step by step:
enable
//пароль для super-user'а
#conf t
(config)#network object videoconf-server
(config-network-object)#host внутренний_ip
(config-network-object)#nat (inside_if,outside_if) static внешний_ip service tcp|udp eq внешний_порт внутренний порт
//повторить на все нужные порты
exit
wr mem
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question