Is it possible to use bridge mode in Mikrotik together with routing?

A

Andrew2019-09-16 10:52:10

Mikrotik

Andrew, 2019-09-16 10:52:10

Hello.
Could you clarify one issue on Mikrotik (RouterOS 6.39).
Two segments of the same network 192.168.1.0/24 are plugged into the Mikrotik, each segment is connected to its own Ethernet port.
These two ports are combined into a bridge.
With this configuration, two segments of the same network must see and ping each other.
In one of the segments there are several gateways for different providers. It would be desirable to configure on them routing on a source.
Can I additionally use the routing of traffic passing through the bridge to direct it to different gateways?
For example, mark traffic using the IP Firewall Mangle (routing mark) and at the same time configure different routing tables for different routing marks.
Thanks in advance for your answers.

Reply

Answer the question

In order to leave comments, you need to log in

2 answer(s)

2

20ivs, 2019-09-16
@spiller1975

Can I additionally use the routing of traffic passing through the bridge to direct it to different gateways?
For example, mark traffic using the IP Firewall Mangle (routing mark) and at the same time configure different routing tables for different routing marks.

absolutely you can. at the same time, you even perfectly understand how to do it yourself =)

R

rionnagel, 2019-09-16
@rionnagel

Yes.