Is it possible to screw the motherboard to the case not on all legs (stand off)?

Question

Computers

The first assembly, I don’t know at all .. I lost a couple of stand offs and one screw. Is it possible to fix the mother not on all legs? If it comes into contact with one of the legs, but is not screwed to it, will nothing be damaged?

Answer 1

Hm. Usually there are so many screws that you don’t know where to put them ... The mother should stand at least on 4 corners, if full-sized - on six supports, otherwise there is a chance that inserting or pulling out a card will fool her. It is not recommended to bend and warp it.
Ask an admin friend for screws - he probably has 100500 of them.

Answer 2

The motherboard is not strong enough to mount it only at the corners. It bends, and since the print there is multi-layered, the inner layers can at the same time get breaks that are completely invisible from the outside, after which it will only be thrown away.
So near the tightly plugged connectors (for example, 24pin power supply), you need to put all the screws.

Answer 3

Nothing will happen. but if there is severe cooling or vidyaha, there may be problems. The
mother cannot be pressed against the body. Through the legs - you can, they isolate
Ask the admin of a friend the cogs, really. them like dirt in all sorts of services and admin rooms)