Answer the question
In order to leave comments, you need to log in
Is it possible to assemble the monitor from the components yourself?
Hello.
I want a monitor 3440 * 1440 with IPS and 144 Hz. up to 40k.
Now I own exactly the same, but with VA.
Accidentally found this ad on Avito today
Answer the question
In order to leave comments, you need to log in
Yes, but it's such a difficult question that it's easier to say no.
Monitors don't appear out of thin air. They are developed, firmware is written, tested. For this, unlocked engineering motherboards can often be used, in which you can change the firmware, update something.
Usually all engineering boards are under strict control, and after development they are destroyed, but it can be difficult to control this. Or you can try to solder the production board and unlock it by uploading another firmware there.
It happens that the manufacturer uses the same motherboards for different models with minimal modifications.
But picking all this is a very difficult task, not quite at the level of wiring and tracks. Usually a person is required who either worked in the service center of this manufacturer, or directly in engineering R&D. Well, either in general for a long time with monitors and somehow it turned out to figure it out.
The fact that such a monitor will be cheaper than from a store - well, this is only due to the fact that it is used and is not needed by the one who re-picked it. Reliability may not be 100%, all the more so there is no guarantee, the cases are too isolated, because there is simply no point in doing this on a stream.
In general, I signed off with the man from the ad, for 50k you can collect with IPS, 144+ and 3440 * 1440
In general, he can find everything that is on sale - but I didn’t check this thoroughly, it turned out that 1500R for IPS does not yet exist;)
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question