Is everything suitable from the list for a quadcopter?

Question

Quadcopter

Good afternoon.
We decided to assemble a quadrocopter, dug up a list of parts in the store:
1. MultiWii PRO Flight Controller with ...
2. Hobbyking X650F Glass Fiber Quadcopter Frame 550mm
3. hexTronik DT750 750kv brushless outrunner
4. 11x4.5E Nylon Multi-Rotor Propellers L/ H and R/H R...
5. TURNIGY Plush 25A Speed ​​Controller
6. ZIPPY Compact 5000mAh 3S 25C Lipo Pack
7. Turnigy Accucel-6 50W 6A Balan...
8. Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receive...
9. Turnigy 2650mAh 3S 1C LLF Tx Pack (Futaba/JR)
10.Hobbyking 105W 15V/7A Switching DC Power Supply
Take off? Do I need a Regulator Programmer?
For the future, FPV is planned on a similar one.

Answer 1

The controller is as old as a mammoth. Well, if you want under the wy - take the AIOP
DT750 - huge, heavy. But reliable and fully functional. Noble dons recommend using SunnySky motors.
Regulators in the trash. Flashing is amenable, but it's hemorrhoids. There Silabs processors. Now it is fashionable to use Afro regulators. They are already stitched with what is needed, and generally good.
The board is old. And the FlySky transmitter (built-in) is not praised. Grab the 9XR and the FrSky kit.
Take off or not - count in the copter calculator.
P.S. Where did you even dig up such an ancient config? It was active 2 years ago.