Intervlan routing on mikrotik rb2011, how to make it work?

Question

Mikrotik

Good afternoon. There is such a network scheme: a
Mikrotik router, followed by a bunch of L2 switches.
On Mikrotik, you need to organize Wealans and a dhcp server for each Wealan and give it in a trunk to all your ports from which there will be switches.
What I am doing now: I combine the ports that will be in the trunk into a bridge, create a vlan and hang it on this bridge. In ip - addresses I specify the ip of the Wealan interface, and its subnet.
I create a dhcp server with a pool for each separate vlan.
In general, everything works. But from one subnet, the gateway simply does not respond to another. All gateways are pinged from the router itself, but hosts on other subnets are not pinged.
The routing table created by default seems to be quite normal.
Tell me what could be the problem?

Answer 1

Tip: read about fluid packages. (about forward).
Try to make everyone accept.
and look.
Don't expect a ping from Mikrotik right away.
Yes, as well as from tsiska.
Wait two minutes, then ping.