How to update cisco 2960x 24ts ll firmware?

Question

Cisco

Cant. I got a new Cisco 2960-x 24ts-ll, I decided to update the firmware through the graphical menu, the process hung, the browser crashed. The update did not complete and, as a rule, the tsiska stopped loading. Here's what the download gives:
CPU rev: B
Image passed digital signature verification
Board rev: 24
Testing DataBus...
Testing AddressBus...
Testing Memory from 0x00000000 to 0x0fffffff.../
Using driver version 4 for media type 1
Xmodem file system is available.
Base ethernet MAC Address: 08:cc:a7:00:91:00
The password-recovery mechanism is enabled.
USB EHCI 1.00
USB EHCI 1.00
USB Console INIT
Initializing Flash...
mifs[5]: 10 files, 1 directories
mifs[5]: Total bytes : 1806336
mifs[5]: Bytes used : 690688
mifs[5]: Bytes available : 1115648
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 2 files, 1 directories
mifs[6]: Total bytes : 3870720
mifs[6]: Bytes used : 1213440
mifs[6]: Bytes available : 2657280
mifs[6]: mifs fsck took 1 seconds.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 8192
mifs[7]: Bytes available : 249856
mifs[7]: mifs fsck took 0 seconds.
mifs[8]: 5 files, 1 directories
mifs[8]: Total bytes : 258048
mifs[8]: Bytes used : 8192
mifs[8]: Bytes available : 249856
mifs[8]: mifs fsck took 1 seconds.
mifs[9]: 0 files, 1 directories
mifs[9]: Total bytes : 56125440
mifs[9]: Bytes used : 1024
mifs[9]: Bytes available : 56124416
mifs[9]: mifs fsck took 2 seconds.
...done Initializing Flash.
Loading "ucode0:"...ucode0:: no such file or directory
Error loading "ucode0:"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:

I checked what is in memory (dir flash:) there is nothing there, all memory is free.

I tried to update via flash drive, but it shows the following:
switch: copy usbflash0:c2960x-universalk9-mz.152-7.E0a.bin flash:c2960x-universalk9-mz.152-7.E0a.bin
ERR: usbd_bulk_transfer fail status 32
ERR: Read ERROR start 0 blks 1
ERR: usbd_bulk_transfer fail status 32
ERR: usbd_bulk_transfer fail status 32
ERR: Read ERROR start 0 blks 1
ERR: usbd_bulk_transfer fail status 32
ERR: usbd_bulk_transfer fail status 32
ERR: Read ERROR start 0 blks 1
ERR: usbd_bulk_transfer fail status 32

usbflash1: contains unexpected values ​​in partition table or boot sector.
Device needs formatting before use!
usbflash0:c2960x-universalk9-mz.152-7.E0a.bin: no such device
The case is possible in a flash drive or format. Although I formatted it under FAT and the volume did not exceed 4.

What should I do? I'll be hanged. I'm still too young.

Answer 1

You are copying iOS from usbflash0 to flash. The error says that the problem is with usbflash 1 . A little care.
https://www.freeccnaworkbook.com/workbooks/ccna/re...