How to troubleshoot Arduino TTL to USB converter driver problems?

Question

Arduino

Good day!
We have Arduino Pro Mini 5v at 328 atmega
when connected to usb via ttl-usb converter is defined in the Manager as follows:

I tried to select different drivers for boards from the arduino folder. The error in the driver goes away but the firmware does not pour. Plus, there is no "Pro mini" in the list of Arduino drivers.
How to solve this problem?

Answer 1

ttl-usb converter bought on aliexpress? Is there a link to a suitable driver on the product page?

Answer 2

There are a great many of them on the board. You need to see which one and download the necessary driver. I didn’t come across it myself, but I read somewhere that PL2303 has several versions that have incompatible firewood. The best option is to talk to the seller of this shit.
PS I also have a suspicion that the right firewood will not save you. For some reason, I am very sure that your scarf does not have a DTR output necessary for firmware

Answer 3

According to PL2303, there is a lot more information in Google, and there are plenty of drivers, but because Chinese drivers are not signed by small software, then you must first disable driver authentication in the system, then install them, all this is also perfectly described in Google.
Arduino drivers will not work, because. official dunes are not made on Chinese microcircuits, but third-party drivers are supported.

Answer 4

Chinese Arduins often have a CH340 chip, usually this is indicated on the seller's page (or look at other sellers), you can also find a link to the Chinese website of the manufacturer of this chip where there are drivers.