How to set up multiple static IPs from an ISP?

B

b_miligan2017-07-27 16:39:49

Computer networks

b_miligan, 2017-07-27 16:39:49

From the cable provider, there are several static IP addresses bound by mac and they are issued via DHCP. What equipment can do this and what options are there for such a setting?
For example, through Mikrotik you can set it up?
through a server or virtual machines?
just through a stupid switch, but this one is too obvious.
i.e. there must be different poppy addresses in order to bind ip addresses to them, how to do this?
is it theoretically possible to bind two ip to one poppy, how does it work?)
ps I didn’t find it in Google, maybe I was looking badly, please answer what options for such a setting are)

Reply

Answer the question

In order to leave comments, you need to log in

5 answer(s)

A

Andrey Zyuzenkov, 2017-07-27
@devzav

the easiest version of Mikrotik, set up two ports

V

Vladimir Zhurkin, 2017-07-27
@icCE

From the cable provider, there are several static IP addresses bound by mac and they are issued via DHCP. What equipment can do this and what options are there for such a setting?

You still need to check with the provider how he will bind the second ip address to you.
Whether it will be possible to hang up it on the interface with one device. If so, then there is no problem in general.

For example, through Mikrotik you can set it up?
through a server or virtual machines?

You can, through any device that can and allows you to put the second, third.1 + n ip.
Dumb switch, it will just scatter the provider's broadband traffic for you and you can plug it into two network cards, yes. So again, check with your ISP.

i.e. there must be different poppy addresses in order to bind ip addresses to them, how to do this?
is it theoretically possible to bind two ip to one poppy, how does it work?)

You can set up several vlans on mikrotik and change mac-adress
https://wiki.mikrotik.com/wiki/Change_MAC_address_...

K

Konstantin Tsvetkov, 2017-07-27
@tsklab

is it possible theoretically to one poppy two ip

Can. In the network connection settings, you can add an address in the IP parameters.

D

Denis Sechin, 2017-07-27
@tamogavk

Any ex. switch. 2 vlans and two sub interfaces on the gateway, but what is it for?

V

Vladimir Dubrovin, 2017-07-28
@z3apa3a

It is impossible to bind multiple IP addresses to one MAC in DHCP without using scopes or making changes to the protocol (immediately send DHCP REQUEST bypassing DHCP DISCOVER). In this case, someone is confusing something, either you or the provider. Check with your ISP to see if the addresses can't be statically bound.