How to select an interface in a route in RouterOS version 7.1.1?

Question

Mikrotik

Hello.
I updated Mikrotik to version 7.1.1 and the first innovation that I noticed was the setting of routes (IP - Routes).
Previously, in the Gateway it was possible to select an interface, or register an ip address. Now you need to write only the ip address, which is very inconvenient and I think it’s not right.
For example connection through PPPOE. The IP address of the pppoe gateway can only be found after it is connected, which is not convenient. And even if you register an ip address, then suddenly the provider in his pppoe change the ip address, then change the routes? And if the provider changes every day?
In general, comrades, maybe someone knows how to specify the interface in the route, like "in the good old days"?
Picture of how it turned out:

Answer 1

PPPoE registers the gateway itself automatically, you need to enable the Add Default Route checkbox in the connection settings

Answer 2

ROS7 is still raw, suitable for experiments and preparation for the update, but not yet for real use.

It's not convenient and I don't think so.

Just right - there will be no extra ARP requests. But in your case with PPPoE it doesn't matter. Never specify an interface in a route.
If you want to manually enter the IP of the gateway (what kind of strange fetish is this, by the way?), Then add commands that will do this in the profile settings on the "Script" tab.

And if the provider changes every day?

It's all very strange. What problem do you solve in this way, and even with PPPoE? It's point-to-point there with the gateway address, you can enter anything, but why do this if the entire configuration automatically arrives via IPCP.