How to run kingston savage memory on 1866MHZ (AM3+)?

Question

AMD

Guys, help me run Kingston HyperX Savage [HX324C11SRK2/16] 16 GB 1866MHZ RAM on gigabyte ga 970a-ud3p at a frequency above 1600MHZ.
There are 2 profiles sewn (but they are more for Intel) with both the computer does not start at all. If I set it manually to 9.33 and the timings are 9-10-11-35, then the computer freezes tightly when entering the desktop. Increased the pressure from 1.5 to 1.65 does not help. changed the timings and ran the same on 2133mhz same story. Plows only at 1600MHZ 2 strips of 8 gigabytes.
Full config:
gigabyte ga-970a-ud3p rev 2.1
(hyper and HT 2600MHZ; voltage per percent 1.4, voltage per hyper 1.33, RAM 2 Kingston HyperX Savage strips at 1866MHZ, all power savings are disabled by itself. percent fx8320e 4.4MHZ (multiplier x22) .
I also tried to reset the bios to default, but the computer does not start up at all if I set the RAM higher than 1600mhz. Although the percentage is supported up to 1866MHz, the motherboard is also up to 2133MHZ.