Answer the question
In order to leave comments, you need to log in
How to properly add and configure a network card in Proxmox?
Good time of the day. How to add and configure a network card in proxymox?
The bottom line is that I installed an additional network in the server, the main network network is already configured on the 192.168.2.0/24 subnet + 2 vlan 101.102 with this network everything is OK, it works properly, I need to configure the new network on a different subnet 192.168.200.0/24 she will not have access to the Internet; he is not needed there.
I added vmbr1 and configured the IP on it, but when the server is restarted, the first network network on vlan 101, 102 stops responding. Where do I need to correct it? Thanks in advance for your reply
Answer the question
In order to leave comments, you need to log in
Himself Asked himself answered. If you have N + 1 network cards, where 1 is your main one, and you want to connect the SAN to the server, write down routes to the storage via dev ethN, you do not need to create vmbr.
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question