How to power a glass lifter?

Question

Do it yourself

There is a need to power the VAZ glass lifter from a constant power source. (From the mains 220V). I tried to record a 12v-5amp power supply - either there is not enough power, or there is a problem with the power supply.
It works from a 12v 1.2 amp hour battery, but this option is not suitable.

Answer 1

You look at the required current strength in the characteristics of your power window and take a power supply unit of the appropriate power, or a 12V battery.
It is not difficult to google the characteristics:
catalog.autodela.ru/article/view/2118?q=article/vi...

Answer 2

Open one cover of the system unit, from the power supply unit, yellow wire +12, Black - ground. Usually there are loose ends on a video card or an additional power supply for a processor. You can even turn off the computer :-)

Answer 3

There is a powerful motor in the window regulator; you need to pull the glass, and even quickly.
If your task is simpler, then it is better to change the engine. This will reduce the load both on the network in general and reduce the device by several times.

Answer 4

In my experience, the window regulator at its peak can consume more than 10A current (when starting or under heavy load), when it spins up and without load, approximately 2A. As a power supply, it is better to use a lead battery, you can from UPS.