How to make friends avrdude and atmega168v-10au?

Question

linux

I bought on the famous Chinese site arduino pro mini (atmega 168).
The ATMEGA168V-10AU chip is installed. I
connected it via Arduino as ISP (I use arduino uno as a programmer), the board is determined.
I start avrdude:

avrdude -p m168p -P /dev/ttyACM0 -c avrisp -b 19200 -U flash:r:test.hex

Gives an error message:

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x3c0102
avrdude: Expected signature for ATmega168P is 1E 94 0B
         Double check chip, or use -F to override this check.

avrdude done.  Thank you.

As far as I understand, avrdude does not support exactly atmega168v-10au, since it does not understand Device signature. Or I'm wrong?
How to flash arduino pro mini on atmega168v-10au chips?

Answer 1

And from IDE it is not programmed? If yes, then peep what the IDE prescribes for the pipe