How to lay the cable?

Question

Do it yourself

Hello.
I have a server cabinet. There was a cable laying problem. The closet is in the next room. How can I run several Internet cables through a small hole in the wall, and most importantly a DVI cable. The DVI connector is very large and I can't make a hole that big. DVI transmits 1920x1080 image. From the monitor to the rack, one and a half meters through the wall. Use 2-3 adapters to "narrow" the connector?

Answer 1

Cut and then solder it. And if hdmi creeps through (you can cut off the insulation from the corners on the connectors), then take the dvi to hdmi adapter, and use hdmi on the monitor. There are also ready-made dvi to hdmi cables.
And even easier - to expand the hole with a puncher.

Answer 2

Alternatively, take an HDMI cable (it has a rather narrow connector) and use DVI adapters.
Well, since DIY and a short distance, then cut the DVI cable and solder it back

Answer 3

In case the option with an HDMI cable is still large, you can use adapters to mini-hdmi and back in the place where the cable passes through the wall.
There are also slightly more exotic adapters. For example here or here .

Answer 4

[x] This is not a question at all
, I don't understand your suffering.
drive a picture by IP, take it on the other side and tell. even in the next room, even on another continent.
and who are "several Internet cables" - I'm generally at a loss. transatlantic cables?

Answer 5

The simplest solution is a perforator!
And so cut the cable and solder!

Answer 6

I would turn to professionals. I can recommend these guys here: https://www.forma-group.ru.