How to force / configure Windows 7/10 so that the configured VPN connection is 1 in priority?

D

dikexp2017-10-10 23:39:48

VPN

dikexp, 2017-10-10 23:39:48

There are 3 machines establishing a PPTP VPN connection. On Windows 7 and 10 machines configured VPN connection and high speed connection. And also 2 are connected through a router with their own subnet for each. It is required to force / configure so that the configured VPN connection is 1 in priority.
Because for example, games created in the LAN server do not see how to set it up?
On Win 10, List of interfaces:

9 - the interface receives, for example, 169.254.70.5
27 - receives 95.254.70.74
26 - receives 192.168.5.201
The problem is that some games (which do not have the ability to directly connect via IP) operate only with network interfaces, but here it has one interface 1 which has IP 169.254.70.5.
On Win 7 (located behind a router), List of interfaces:

Here is the same picture only that there is no extra. connections. but the network card receives the local address in the range specified by the router 192.168.54.6 for example.

Reply

Answer the question

In order to leave comments, you need to log in

3 answer(s)

@

@nidalee, 2017-10-11
_

It used to be like this: in the "network and sharing center" - "change adapter settings". A list of adapters opens -> alt -> in the appeared panel "advanced" -> "additional parameters", and everything is already clear there .
But on 10k it was not possible to repeat, the final window is different. Maybe it's just me...

L

Ltonid, 2017-10-11
@AtaZ

In the vpn settings there is a checkbox to use it as a gateway. There is such a thing as routes and metrics.

D

dikexp, 2018-08-23
@dikexp

In general, everything was resolved in one of the networks, deployed the server part of SoftEther VPN, then, through their client utility, I picked up 2 machines that received IP from my router through the bridge on the server. It turns out that after connecting to the server, their machines transparently communicate with the router because of the same principle as my machine. All network functions work, which is not good, I had to tinker for 2 weeks, but I figured it out. The priority (metric) is automatically set by the client of the program.