How to declare a trunk on a Mikrotik port?

Question

Mikrotik

Hello, I have such a question, there is a Mikrotik on it on the 1st port, I declared vlans, it turns out to be a trunk port, but I just don’t understand how on the 5th port, also declare some of the vlans that have already been created, for example Vlan 3, Vlan2, vlan4. Most likely with the help of a bridge, then it is necessary to bridge Vlany and compare with the 5th port ???
Example of my config https://pastebin.com/Ca4btGBU

Answer 1

It is not entirely clear why you are dragging the trunk through Mikrotik.
To solve the problem, you need to create all the same Vlans (with the same PVIDs) on the second port. Then bridge each vlan in pairs.

Answer 2

if the same number of vlans is forwarded from port to port, then you can drive ports into the bridge and hang vlans on the bridge. If different vlans from different ports, then we combine the vlans into a bridge, if you need to give an access to the port, then the port into the bridge with the vlan.