How to cross a Dell CS24-SC server and a single SSD?

Question

RAID

We have a DELL CS24-SC server, it has an LSI SAS 3000 raid controller.
There are 2 HDDs of 250 gigabytes each in the raid, and there is a desire to either replace them with one Samsung 860 PRO SSD
or add it as a separate one, but their controller does not see point-blank .
But all attempts to find it end in failure.
I already installed it separately and third, and turned off the LSI controller altogether - and nothing, I don’t see it at least kill myself.
There is a suspicion that in general the server is old and will not see it, although if you insert it, then when loading LSI it displays a message - WARNING! Foreign Metadata detected...

Answer 1

I have not seen such servers for a long time, but EMNIP, then this controller (if it looks like, for example, Y8Y69) only supports Raid 0, 1 and 10. I did not try to connect one disk.
In addition, check if you have a vendor lock for disks only from Dell (OEM).
Also, I think when LSI comes with a server, Dell also provides drivers for them.

Answer 2

Is the disk detected in lsi storage manager? In theory, it should, if at the stage of loading it reacts to it. Through it, create raid0 from this single disk and mark it through disk management

Answer 3

If the board does not have separate sata connectors, it is possible to disable lsi in the BIOS. And it is possible to connect sata ports as usual from the south bridge.