How to connect moons on Eternus dx 60s2?

Question

Iron

4 moons were created on the storage, connected to lun mapping in one group of 2 moons.
From the second group, I removed 1 moons and separately created a group for the group and indicated the number of the moon in the group. Further in the ports, I registered the ip address and indicated that created group. Then I skid in the Host if Management settings where the ports are configured and the iscsi name is registered. There are 4 ports on the storage and in the settings each port has its own ip address, but for some reason the iscsi name is the same on all ports.
I then thought that it’s better not to touch it and on the server in the iscsi service I registered the ip address of the cm # 0 port # 1 port. I see the connection in the target, but I don’t see the hard drive in the devices.
Please tell me what am I doing wrong?

Answer 1

I myself did not use such a piece of iron, but
:

There are 4 ports on the storage and in the settings each port has its own ip address, but for some reason the iscsi name is the same on all ports.

If this is within the framework of one head (and not one like) it should be so. Since you have a shared tree on the pool.
In Win iscsi, in general, you don’t need to register anything, just specify ip, it will show a list of what it has. It is possible to pass authorization, if it is. So, of course, you need to look at the manual for the hardware.