How to connect 2 case coolers on msi b250m pro-vd?

Question

Iron

Good evening. I bought an msi b250m pro-vd motherboard , somehow I didn’t see that it had 1 4-pin connector for connecting a processor cooler and 1 4-pin connector for a case one. And in addition to the processor, I also have 2 case coolers. Tell me, is it possible to connect another 1 case cooler and how? Maybe there are some kind of adapters-doubles?
There is a free connector of some kind for 4 pins, but it is without a plastic guide, just 4 pins (in the photo it is in the lower right corner, right opposite the extreme sat port), I don’t know what it is for.

UPD. The connector, which is indicated in the picture, apparently for the speaker (speaker), found it in the box from under the motherboard, and it is 4-pin and squeaks if you connect it there. Is it possible to insert a 3-pin cooler into it?

Answer 1

Included with the cooler was an adapter for a Molex, and connected it through it :) Thank you all for your help

Answer 2

Splitters exist, for example "Deepcool FAN HUB".
Coolers should not be inserted into connectors that are not intended for this.

Answer 3

There are splitters like Deepcool FAN HUB , there are more serious ones.

For the speaker, I found it in the box from under the motherboard, and it is on 4 pins and squeaks if you connect it there. Is it possible to insert a 3-pin cooler into it?

The cooler, at best, will not start, at worst, it will kill the motherboard (unlikely, but as you know, once a year a stick can shoot), do you need it?
(((It seems that we live in the age of high technologies, but we can’t get rid of the desire to put something somewhere..)))
The connector you specified is intended for the speaker and nothing more. I recommend that you carefully read the documentation for the board if you do not want to become an expensive customer of the service center.