How to configure the network on the HP A5800 switch through the console for subsequent login and Web interface and port settings?

Question

network hardware

Good afternoon,

Tell me how to configure the network through the console, call / see ip to enter the switch Web interface?
Maybe someone knows the guide step by step on the Quick start of this iron.
I can’t deal with the shell in any way, how to determine what kind of axis is on the hardware? There is no information at startup.

Answer 1

1) system-view- Enter privileged mode
2) ip http enable- Activate IP for http
3) local-user admin- Create a local user with the name 'admin', after entering this command, you will immediately transfer the directory of this user. You can make up your own names.
4) password simple 12345678- Being in the created user set the password '12345678'.
5) authorization-atribute level 3- We set the 3rd level of access to the user
6) service-type telnet- The way the user communicates with the web interface, without it your user will not even be able to log in to the interface.
7) quit - exit the user settings
8) interface vlan-interface 1- Enter the Vlan we need, by default it's '1', I don't torture myself and configure it since all the switch ports are already connected to it.
nine)ip address xxx.xxx.xx.xx- Set ip from your network range.
10) quit- We leave your Vlan'a
It is desirable to enter each one in order, and then, after connecting and entering the IP you specified in the browser, the Web interface will open and prompt you to log in with the user data you specified.
There can be errors in commands, check each one with tab, initially entering the first 2-3 characters from the command. Example sys+TAB = system-view If there is only one command starting with system.