How to configure nat in VLAN?

Question

Computer networks

The bottom line is that you need to build a network according to vlans on mikrotik, I set up the vlans, everything works but only on host machines, the problem is that each vlan must have its own domain, it is located on a virtual machine, it is necessary that in each vlan network on the active directory domain there must be Internet, on the basis of the network 192.168.0.0/24, the Internet is everywhere, on 192.168.10.0/24 there is no Internet anymore, most likely I am sinning on NAT, because I wrote the rule and everything worked, I see the solution to the problem in NAT, but I can be wrong, I still assume that he takes external dns, because in his dns records 192.168.10.1/24 there is no internet. It is necessary to make the Internet at the address 192.168.10.100/24

Answer 1

Hang up vlan interfaces on the bridge. conditionally interfaces vlan10 vlan-id=10 and vlan20 vlan-id=20, throw addresses on them
What you want is called InterVLAN routing . It is implemented as I described above.
further, as a gateway, specify the ip of these interfaces for your network, respectively