M
M
Mark Rosenthal2014-10-25 15:04:43
Computer networks
Mark Rosenthal, 2014-10-25 15:04:43

How to achieve visibility of two computers through the server in Cisco Packet Tracer?

Hey!
Please explain why the packets will not go from A to B.
Namely: from 192.168.1.10 to 192.168.2.10
The configuration is as follows:

Устройство IP-адрес Маска подсети Шлюз по умолч.

PC0 192.168.1.10 255.255.255.0 192.168.1.1

PC1 192.168.2.10 255.255.255.0 192.168.1.1

Server-PT Fast Ethernet 0 192.168.1.11 255.255.255.0 192.168.1.1

Server-PT Fast Ethernet 1 192.168.2.11 255.255.255.0 192.168.1.1

9c1dcab6ca0b45e9a11989cffa506050.png
What needs to be done in the tracer package so that the PCs can see each other?

Answer the question

In order to leave comments, you need to log in

3 answer(s)
S
Sergey Petrikov, 2014-10-25
@RicoX

Here's why:
PC1 192.168.2.10 255.255.255.0 192.168.1.1
Doesn't it bother you that the gateway is not included in the mask?

K
Konkase, 2014-10-25
@Konkase

Servers in PT do not know how to route. Dig in a full-fledged router.

I
Ivan, 2014-10-25
@Ivanzor

The PCs are on different networks. You need to place the PS on the same network, since the /24 mask then you have hosts from 1 to 254.
The server is not able to transfer traffic between networks.
Use a router.

Didn't find what you were looking for?

Ask your question

Ask a Question

731 491 924 answers to any question