Answer the question
In order to leave comments, you need to log in
How to access local server from internal network by external ip address via Cisco?
Good afternoon.
Please answer the above question.
Initial data;
Cisco C881W-E-K9 router
External IP address: 46.xxx.xxx.xxx
Internal
subnet: 192.168.1.0 255.255.255.0
the same internal subnet.
This need is due to the inconvenience for users - it is easier to remember one external ip address and, without reconnecting when you come to the office, automatically connect to the local server services without changing ip-addresses from external to internal.
How to set up this kind of broadcast on a Cisco router?
NAT translation is configured from the outside - employees can access, for example, being connected to the mobile Internet or from a home computer using an external ip router.
I heard that there is a so-called NAT LoopBack translation of ip addresses, but I don’t quite understand how to configure it on Cisco.
If there are any other implementation options that solve this problem, then I will be glad for any information.
Thank you.
Sincerely, Dmitry.
Answer the question
In order to leave comments, you need to log in
Better configure split DNS (or inspect dns, if the device is capable of rewriting the name to the local address by forwarding). Then one name will be resolved to the external address outside and immediately to the internal one inside.
To you aside
hairpin nat cisco
Did the same nonsense for MikroTik.
And what is wrong with normal port forwarding from outside to inside, and walking both from inside and outside to the external interface?
Didn't find what you were looking for?
Ask your questionAsk a Question
731 491 924 answers to any question