How are access cards programmed?

Question

Programming

We were given the task to learn how to program access cards from turnstiles, I would like to know with what software they are programmed, what you need to know, etc.

Answer 1

The turnstiles are controlled by the Access Control and Management System (ACS). This is a software and hardware complex, i.e. Software and hardware (locks, alarms). This is how the software is programmed. In some cases, it is enough to enter only the card number into the system, in others it needs to be programmed using a special terminal and a master key.

Answer 2

First, find out which controller, then how and where it is connected, then where it stands for which serves them, then deal with the software itself, the database of employees, departments, turnstiles. As a rule, departments are assigned turnstiles and various doors, and employees are assigned departments where they are given access. First, an employee is added, then his card, and lastly, everything is distributed to the controllers. And only after that it starts to work.

Answer 3

matrix proxy card is the commercial name of a particular office that sells a solution based on some kind of cards.

Answer 4

For the first time I hear the name matrix proxy card . In fact, Matrix is ​​the name of the readers and controllers from the manufacturer IronLogic . The reader must be connected to some kind of controller, but the stand-alone controller is combined with the reader and this is the most budgetary ACS option. In a situation with a turnstile, two such controllers are needed - one for the entrance, the other for the exit. And you also need two relays or one double, because. the controller gives out 12 V, and the turnstile is just a short circuit. Judging by the statement of the problem, this is what we are talking about. Only it would be more correct not to program the matrix proxy card to the turnstile , but to enter the proxy card into the matrix controller . More precisely,Matrix II K . Following the link, on the description page, you can find instructions on how and what.