Hardware for graphic applications 3d max autocad etc. which?

Question

Iron

Hello! Help to understand with iron for graphic applications!
at the moment there is such iron!

CPU type DualCore Intel Core i3-6100, 3700 MHz
System memory 16310 MB (DDR4-2133 DDR4 SDRAM)
DIMM 8 GB DDR4-2133 DDR4 SDRAM
Video adapter Gigabyte GeForce GTX 750 Ti (1 GB)
Samsung SSD 850 EVO 250GB (250 GB, SATA -III)
ST1000DM003-1SB102 (1TB, 7200RPM, SATA-III)

In autocad, when copying and pasting, the application freezes for 20-25 seconds.
At the same time, the disk load is weak, there is a lot of memory, the video is not sure, but there is practically no load.
but there is a short-term load on the processor, but even then it’s not 100%
, i.e. when copying, the download jumps sharply from 60 to 80%, the program freezes for a few seconds, but at the same time I can easily work other applications, open Word, browser, etc., everything this is done when the processor load is fast and without brakes, but the autocad program hangs.
My conclusion is that something is wrong with the program, because the processor is not loaded at one hundred percent!
I got into the Internet and googled, there are solutions, the problem lies in the AutoCAD files themselves, some stripes are not the same, some kind of cleaning needs to be done, etc. (I haven’t tested it yet and I can’t say anything) In general, it’s strange, especially the case where it is recommended to optimize the chart itself and redraw the fence using other elements, etc. (what kind of nonsense if I need exactly these elements?)
BUT, big but, the employee brought another computer with with the same hardware, but i7 percent, the hang time was sharply reduced, so I'm confused, users are sure that they need a computer of thousands, so for 100 I didn't see the load on this hardware, and I don't understand why it's new.
Tell me how the work of graphic applications is generally analyzed? how is iron monitored and what specific parameters should be paid attention to?

Answer 1

Is your video card compatible with graphic editors? autocad and max have their own requirements for video cards

Answer 2

The question is relevant!
3D elements in 3D area 450 approximately elements, copied with a delay of 5 10 sec.
Computer new
OS new
New installation of
AutoCAD Proc i3-6100 and i5
The processor is loaded at 25% why, I know, but I don’t know what processor is needed so that the autocad does not hang.
Please find those who work, tell at least your configuration. Thank you!